Technical Blog
Druck PM620S-11G IS Pressure Module, −1 to 10 bar | PinShun
Druck PM620S-11G Intrinsically Safe Pressure Module: What It Is and Where to Use ItIf you calibrate pressure instruments in a hazardous area, the pressure module is the part that decides whether you can work at all. The Druck PM620S-11G is a gauge pressure module rated −1 to 10 bar, built for exactly that job.
One module, no setup
PM620 modules are interchangeable. You screw the module onto a compatible Druck calibrator, hand-tight, no tools and no sealing tape. The electrical and pressure connections are made in the same action. The calibrator reads the module's digital characterisation automatically, so there is no re-ranging, no zeroing and no calibration after a swap.
That is the practical value: one calibrator body, a handful of modules, and you cover every range on site without sending anything out for service.
What "S" means
The S in PM620S is the intrinsically safe version. It carries ATEX approval (Baseefa 16ATEX0012X, Ex ib IIC T4 Gb, −10 °C to +50 °C) and IECEx approval (BAS 10.0004X), plus ETL listing for the US and Canada. It is designed for Zone 1 work where a standard module cannot be carried in.
One rule to remember: IS modules only pair with IS-rated Druck equipment. If your calibrator is a standard DPI 620 series unit, this module is the wrong choice no matter how well the range fits. Check the label on your base instrument before you order.
Where the −1 to 10 bar range fits
The 10 bar gauge range covers the most common field instruments: pressure gauges, low-range transmitters, pressure switches, purge and blanket gas systems, and compressed air lines. The −1 bar bottom end lets you check vacuum and slight negative pressure as well.
Typical users are refinery and gas terminal technicians, chemical plant instrument teams, and calibration labs that support those sites. Media must be compatible with stainless steel.
Buying checklist
- Gauge or absolute? 11G is gauge; absolute ranges use a different suffix.
- Range in bar or psi, not "about 10 bar" — check the transmitter's span.
- IS pairing: base instrument must be Druck IS-rated.
- Calibration certificate: confirm whether you need a traceable cert with the module.
- Thread adapters: order the fittings for your test points in the same shipment; a module without the right adapter stops the job.
Druck PM620S-11G modules and matching adapters are available from PinShun Automation with short lead times. Send us the range and your calibrator model, and we will confirm compatibility before shipping.
CATEGORIES
LATEST NEWS
CONTACT US
Contact: IDA
Phone: 15295036218
Tel: 15295036218
Email: sales@vs-control.com
Add: Changzhou, Jiangsu Province, China
